What is the difference between the installation method of the track pressure plate structure

With the continuous development of the economy, many enterprises have more and more demands for production and warehousing. At the same time, more and more rail plate manufacturers are also strengthening their logistics and distribution. If their own logistics system is more stable, they will be in Many procedures have become more controllable, and at the same time can save costs. This also means that many companies need to install driving vehicles to improve logistics and storage. Generally speaking, there are two types of track devices, one is concrete and the other is steel structure. Give us an introduction.

Track pressure plate manufacturers

The concrete structure generally adopts pre-embedded bolts or pre-embedded reserved holes when installing the driving track. After the track is placed in place, the track pressure plate is fastened with bolts to fix the track. In the process of operation, the bolts and rail pressure plates are easily loosened due to the trembling of the driving, which needs to be checked, strengthened or replaced regularly. However, some of the strength can be buffered after using the rubber pad and rubber tongue depressor.

Steel structure is the first choice for factory buildings in recent years. There are many choices for laying the steel structure track. In addition to punching the I-beam beam, it can also be welded. The punching of the I-beam can be made of double-hole or single-hole forging driving plate. In the middle, it will also be damaged due to tremors or the deflection of its own weight and inertia after the braking, impact and other reasons.

What is the difference in the installation method of the track pressure plate structure-track pressure plate manufacturer

Welded pressure plate is also a good choice. Welded rail pressure device can fix the track and the steel beam together. Because the bolt and the steel beam are not directly connected, it can buffer part of the strength