Installation and maintenance of elastic strips

Standards for installation of elastic bars: The front jaw of the middle part of the elastic bars and the insulating block should not be in contact, and the gap between them should not be greater than O. 5 mm; or when using a torque wrench to detect the torque of the T-bolt, the W1-type clip is 100~140 N·m, and the x2-type clip is 70~90 N·m.

Clip maintenance standards: The front jaw of the middle part of the clip should not be in contact with the insulating block, and the gap between the two should not be greater than 1 mm; or when using a torque wrench to detect the torque of the T-shaped bolt, the W1 type clip is 1()(]~140 N·m , x2 type spring bar is 70~90 N·m.